|
|
|
Yiwen Vehicle GPS Tracker GX805S SMS Command List
|
|
tags:GX805,SMS Command
|
1) Center Phone Number | Command | Format | Example | Addition | CENTER,A,phone number# | CENTER,A,13500135000# | Deletion | CENTER,D# | CENTER,D# | Instruction | 1) The center phone number is for remotely stop vehicle engine. 2) The center phone number is for receiving text message and phone call alarms of shock, overspeed. 3) The center phone number has only one. 4) The center phone number can be changed by resending the above commands. 5) The center phone number can be set by CETNER,A,phone number# and deleted by CENTER,D# | Successful Feedback Format | CENTER,A1,phone number# -> SET CENTER OK! CENTER,D# -> DEL CENTER OK! |
2) APN | Command | Format | Example | APN Setting | 1. APN,apn,user name,password# 2. APN,apn# | 1. APN,cmnet,123,123# 2. APN,cmnet# | Instruction | APN setting command is for configuring different network access point of different SIM card in different country. If the APN can be obtained with user name and password from SIM card operator, the command must be APN,apn,user name,password#, if cannot, be APN,apn# | Successful Feedback Format | Set APN OK! |
3) Positioning Frequency | Command | Format | Example | Positioning Frequency Setting | TIMER,seconds# | TIMER,30# | Instruction | Range: Positioning per 10-60 seconds. Default: Positioning per 30 seconds. | Successful Feedback Format | SET TIMER OK! |
4) Stand-by | Coammand | Format | Example | Stand-by Mode | NOUP# | NOUP# | Instruction | This command is use for stopping the GX805S send data to software to save power by closing GPS/GPRS and get into the stand-by mode (Electric current: 5MA) which only receives text message and call. If need to close the mode, above TIMER command must be used. | Successful Feedback Format | STANDBY MODE:ON! |
6) Timezone | Command | Format | Example | Timezone Setting | GMT,hemisphere,timezone,half timezone# | 1) GMT,E,8# 2) GMT,E,6,30# | Instruction | This command is for changing GX805S timezone(default: Beijing timezone E8) within range: E or W and 0-12. 1. Hemisphere: E means the eastern hemisphere, W mean the western. 2. E.g. Irani timezone is GMT +3:30, the command must be: GMT,E,3,30# | Successful Feedback Format | SET GMT OK! |
7) Language | Command | Format | Example | Language Setting | LANG,0# | LANG,0# | Instruction | This command is for changing GX805S language to Enlish. | Successful Feedback Format | SET LANG OK:EN |
|
|